Test Centres in Co. Antrim


Pennybridge Industrial Estate
Larne Road
BT42 3ER

Tel: (028) 2565 6801

Vehicle Tests Conducted:
  • Cars
  • Motorcycles
  • LGV
  • PSV
  • HGV
  • Taxis
                                                                                              
View Ballymena map or see directions below
Enlarge Ballymena Map
(84KB, opens new window)

From Mallusk

Take the M2 northbound at junction 4 (Sandyknowse roundabout), exit at junction 1 of the M22. At that roundabout, follow signs for Ballymena (A26) to the seven towers roundabout. Take the first exit onto Ballee Road East then take first left into Pennybridge Industrial Estate.

From Larne

Take the A8 to Belfast. Turn off onto the A36 toward Ballymena. Pass through Kilwaughter, Shoptown and Moorfields until you reach the Larne Road roundabout. Take the first exit onto Ballee Road East then take the first right into Pennybridge Industrial Estate.

From Coleraine

Take the A26 to Ballymena passing through Ballymoney. Join the M2 at junction 12 and exit at junction 10 (Larne Road Roundabout) Take the second exit onto Ballee road East then take the first right into Pennybridge Industrial Estate. knowse Roundabout take fourth exit, Scullions Road. At the end of the road turn right onto the Mallusk Road follow this road until the junction with Cloughmore Road (HSS is on your right) and turn right into the Cloughmore Road. At the end of this road turn right onto Trench Road then follow this road round to Commercial Industrial Estate on the right.

[top]

66 Balmoral Road
BT12 6QL

Tel: (028) 9068 1831

Vehicle Tests Conducted:
  • Cars
  • Motorcycles
  • LPCV
  • PSV
  • HGV
  • Omnibus
  • Trailers
  • RPC
                                                                                              
View Belfast map or see directions below
Enlarge Belfast Map
(78KB, opens new window)

From Lisburn

Take the M1 to Belfast. Exit at junction 2 - Stockman's Lane Roundabout. Take the third exit off the roundabout onto Stockman's Lane - (A55 outer ring). At the first set of traffic lights take a left onto Boucher road. Follow the road until the junction at B&Q taking a right turn into Balmoral road.

From Mallusk

Take the M2 to Belfast and join the A12 - Westlink. Stay on the westlink to the end (Fourth junction) The Broadway/M1 roundabout. From here take the first exit, following the signs "Adelaide and Balmoral Industrial Estates - Boucher road" Follow this road until you reach B&Q and take a left turn into Balmoral Road.

[top]

Ballyboley Road
Ballyloran
BT40 2SY

Tel: (028) 2827 8808

Vehicle Tests Conducted:
  • Cars
  • Motorcycles
  • LPCV
  • LGV
  • HGV
  • Omibus
  • Taxis
  • VED
                                                                                              
View Larne map or see directions below
Enlarge Larne Map
(83KB, opens new window)

From Ballymena

Take the A36 from Ballymena, passing through Moorfields, Shoptown and Kilwaughter until you reach the A8 (Ballymena Road) Go left on the A8. There is a mini round-about at the Ballyboley Road Junction!

From Mallusk

At the Sandyknowse Roundabout take the exit for the A8 (Larne) Stay on the A8 passing through Ballynure, into Larne.

[top]

Ballinderry Industrial Estate
Ballinderry Road
BT28 2SA

Tel: (028) 9266 3151

Vehicle Tests Conducted:
  • Cars
  • Motorcycles
  • LPCV
  • HGV
  • Omnibus
  • Trailers

Other Services:
  • VIC
                                                                                              
View Lisburn map or see directions below
Enlarge Lisburn Map
(100KB, opens new window)

From Belfast

Take the M1 countrybound, exiting at junction 6 (Lisburn/Saintfield). Take the third exit into Lisburn (A49) Saintfield Road/Sloan Street. After two sets of lights take an immediate left at the junction onto Laganbank Road, following the signs for Moira (A3). Go through two more sets of lights (past the omniplex on your left) to the next multi-junction. Go left onto Longstone Road/Moira Road (A3). At the junction of the second set of lights, turn right onto Ballinderry Road. Follow the road ahead over a hump back bridge and take the next road to the right leading in to Ballinderry Industrial Estate.

From Craigavon

Take the M1 citybound, exiting at junction 9, Moira roundabout. Take the second exit, Moira Road (A9) signposted for Lisburn. Stay on the A3 until you reach the lights at the junction with the Knockmore road, go left and follow the road to the junction with the Ballinderry Road, turn right past the Down Royal which is on your left. Take the second road to the left into Ballinderry Industrial Estate

From Newry

Take the A1 to Lisburn, Sprucefield Roundabout follow the signs for Lisburn A1 (Hillsborough Road), through two sets of traffic lights (past the Lagan Valley Hospital on your right.) until the junction at the next set of lights. Go left, (past the omniplex on your left) to the next multi-junction. Go left onto Longstone Road/Moira Road (A3). At the junction of the second set of lights, turn right onto Ballinderry Road. Follow the road ahead over a hump back bridge and take the next road to the right leading in to Ballinderry Industrial Estate.

[top]

Commercial Way
Hydepark Industrial Estate
BT36 8YY

Tel: (028) 9084 2111

Vehicle Tests Conducted:
  • Cars
  • Motorcycles
  • LGV
  • PSV
  • HGV
  • Taxis
                                                                                              
View Mallusk map or see directions below
Enlarge Mallusk Map
(83KB, opens new window)

From Ballymena

At the 7 towers roundabout take the A26 to Belfast. Join the M22 and then the M2 at Junction 1. Exit at Junction 4 (Sandyknowse Roundabout) Take fifth exit, Scullions Road. At the end of the road turn right onto the Mallusk Road follow this road until the junction with Cloughmore Road (HSS is on your right) and turn right into the Cloughmore Road. At the end of this road turn right onto Trench Road then follow this road round to Commercial Industrial Estate on the right.

From Belfast

Take the M2 northbound at Junction 4 (Sandyknowse Roundabout) take the A8 exit. Take the first exit off the roundabout, Scullions Road. At the end of the road turn right onto the Mallusk Road follow this road until the junction with Cloughmore Road (HSS is on your right) and turn right into the Cloughmore Road. At the end of this road turn right onto Trench Road then follow this road round to Commercial Industrial Estate on the right.

From Larne

On the A8 follow signs for Belfast until Sandyknowse Roundabout take fourth exit, Scullions Road. At the end of the road turn right onto the Mallusk Road follow this road until the junction with Cloughmore Road (HSS is on your right) and turn right into the Cloughmore Road. At the end of this road turn right onto Trench Road then follow this road round to Commercial Industrial Estate on the right.

[top]